Uniflair WMA 0281 Instalační manuál stáhnout pdf (Strana 14)

INSTALLATION

Wall Mounted 0121…0661

14 (22)

Monobloc Wall Mounted Unit - WMA/WMF 0121-0181-0251-0281-0331-0551-0661 - Rev. 2.0. - Date: 18-07-2000 EN

6. If the units are connected electrically with the inside of the air conditioned environment, make holes for the

passage of cables (one for the power cable, one for the user terminal connection and the control cables);

367

575

Ø 30 mm

502

785

105

Ø 36 mm

264

Ø 30 mm

Ø 22 mm

WM*0121-0181 WM*0251-0331 WM*0551-0661

Fig. 13.

7. Fix unit support bracket D with three screws E (see fig. 12. - 14.);

n. 3 FORI Ø8 mm

40 40

d d

0121

0181

0251

0281

0331

0551

0661

600 880

260 400

45°

Fig. 14.

8. Lift the unit from below with a pallet truck (or with a hoist using canvas belts passed underneath the unit) and fit

the lower flange over the lip of support bracket D; in this phase it is very important to support the unit on all sides to

prevent it swinging or falling;

9. Fit screws E (recommended diameter 8 mm) to fix the unit to the wall; through bolts are recommended,

especially on light walls. The use of screws with expansion plugs is recommended only on masonry or brickwork

walls.

10. Check that the unit is level; an inclination of more than 6-7 mm (0.5°) could cause the condensate tray to

overflow;

11. Apply a layer of builder’s silicone to the joint between the top cover of the unit and the wall to prevent rain from

entering the gap (see fig. 10.).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Komentáře k této Příručce

Žádné komentáře

Uniflair WMA 0281 Instalační manuál Strana 14

Komentáře k této Příručce

Související produkty a manuály pro Split-systém klimatizace Uniflair WMA 0281